З 18.12.23 магазин в м.Дніпро за адресою вул.Новокримська 58 не працює.
Однак, наш інтернет-магазин відкритий для вас 24/7.
Усі місцеві замовлення можуть бути відправлені кур'єрськими службами.
Web Speech API is not supported by this browser. Install Google Chrome.
Voice input also works in Safari, Yandex, as well as mobile browsers Huawei, Opera and Samsung..
High temperature two-component adhesive putty filled with metal powder, ceramics, quartz fibers. Possesses high impact strength and hardness after curing.
Recommended for sealing cracks in cylinder blocks of internal combustion engines, filling casting defects (porosity, cavities).
Sealing cracks in aluminum radiators, fuel tanks, various containers for fuel, oil, water, antifreeze.
Specifications:
appearance of component A: viscous mass, silvery
appearance of component B: viscous mass, yellow-brown
hardness: Shore-D ≥ 80 at 25°C
shear strength at room temperature: ≥ 15MPa after curing at 25°C for 24 hours
maximum operating temperature: 150-200°C
ratio of components: A: B = 2: 1 (mass ratio)
setting time: 45 minutes
functional curing time: 24 hours at 25°C (70-80% strength)
curing time: heating up to 80°C after curing at room temperature for 24 hours, or holding for 7 days at a temperature of 25°C
packing: plastic jars
weight of component A: 100 grams
component B weight: 50 grams
Recommended use:
Prepare bonding surfaces: wash off dirt, oil residues, degrease well. Sandpaper or any other abrasive.
Mix the components of the adhesive in the ratio A: B = 2: 1 (mass ratio).
Apply glue to the surfaces to be bonded, squeeze and leave for 24 hours. If necessary, the joint can be additionally reinforced with metal mesh or fiberglass.
Leave your feedback or ask a question
Only this product is discussed here. Off topic comments will be deleted! Please follow the Commenting Rules.
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.
If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Ярослав
unknown